ExtremeSwitching (VSP/Fabric Engine) - Page 126 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

SPBm with Extreme and Alcatel

Hi all, We are trying to setup a L2VSN connection between VSP 4k switches and Alcatel Omniswitch 6860 series. For what we can see we have tried all the settings possible, but the only thing we managed is that the VSP appeared in the LSDB of the Omn...

Resolved! ERS 4850 stuck fw 5.65

I have purchased some used Avaya Ethernet Routing Switch 4850GTS-PWR+, however they are on: HW:12 FW:5.6.0.18 SW:v5.6.3.024 BN:24 I need the software image for 5.6.5 or 5.7 and diagnostic image 5.8.0.01 or 5.8.0.03 then I can download the rest from...

ERS4900 - dhcp-snooping trust NNI interface

Hi folks, In switch/stack ERS4900 with SPB config, when you configure dhcp-snooping, do the NNI interfaces have to be set to trusted like an uplink port in legacy networks? Regards, EF

ACL migration from Nortel ERS-8800 to VSP

Hey Everyone, We are migrating from our ERS-8800's to new VSP switches and I seem to be having issues with the new ACL configuration. Previously it was set to: filter acl 50 create inPort act 4092 name "PolicyName" filter acl 50 ace 97 create name...

disconnected: protocol error: rcvd type 0 (2)

I'm trying to get config from the switch using oxidized, but my switch gives an error message: "disconnected: protocol error: rcvd type 0 (2)" I'm not sure what causes this error, my ERS switches does not have this problem. The log below is from a V...

Top Kudoed Authors

User

Count

40

27

23

18

10

GTM-P2G8KFN