ExtremeSwitching (VSP/Fabric Engine) - Page 29 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! arp cache time

Dear Community,when does a arp entry in the cache of a vsp-Switch deleted?Can this be modified?Our problem is that we use a 60 minutes lease time at the DHCP server. And sometimes the NAC System reports a ARP spoofing event if DHCP server offers a ne...

VSP4450 Error: IP address does not exist in GRT

VSP4450, version 8.5.1.0. Trying to add a new VRF & loopback as part of my fabric extend configuration. This works fine on VSP5420 running 8.5.1.0 and on a VSP4900 running 8.4.2.1. Maybe some redistribution is needed, but seems odd as the other model...

Superseeding a direct route with a static route in VOSS

Hi all.I'm curious about if it's posible to make a static route better than a direct route in VOSS 8.2. In my setting we have a VLAN with the gateway *outside* the switch but with an IP configured in the switch VLAN interface, so there is a local dir...

What type of connector is supported in Extreme SFP module?

Hi, Is there any official recommendation what type of connector I should use in Extreme SFP modules? I suppose I should use LC UPC, but can I use LC APC? I could not find any statement in Extreme documentation but for example Cisco doesn't support LC...

Resolved! NNI as a DCI - Best practice

Does Extreme have any best practices for DCI links configured as NNI's for a pair of 8404's?These NNI's will be be connecting BCB's, So at this point of time they are strictly just transit nodes and are not doing any L3 features for the network, VRRP...

Top Kudoed Authors

User

Count

28

15

14

11

5

GTM-P2G8KFN