Resolved! Wake on LAN
Hello everyone, I have a question about wake on lan. In XOS it was policy based. e.g. entry one { if match all { source-address 192.168.1.2/32; if match any { destination-port 9 ; ...
Hello everyone, I have a question about wake on lan. In XOS it was policy based. e.g. entry one { if match all { source-address 192.168.1.2/32; if match any { destination-port 9 ; ...
Upon using this commandint gigabitEthernet 1/32speed 1000I keep getting the errorError: port 1/32, Can’t set admin speed on this port.
What model gbic/sfp do I need for single mode yellow fiber going 1.5 miles? I’ve been looking around but can’t find any info. I have a 1gb gbic in an Etherwan EasyPoe Box going 1.5 miles using single mode yellow fiber into an extreme vsp-7400-48y. I ...
Hi all,I have a bunch of VOSS devices running 8.10.2.0.Inter VLAN routing is done outside of the fabric, so it's basically a L2 fabric, and switch mgmt is done over mgmt VLAN interface.I'd still like to be able to configure an mgmt CLIP in case somet...
We have an 5320 (VOSS 8.8.1.0) which doesn't onboard into XIQ-SE 22.9 properly.It shows up in "Discovered" pane of XIQ-SE, and after Configuring it, it shows "ZTP+ Use Discovered IP Error"On the switch it says2023-12-15 15:21:43,616:DEBUG:MainThread:...
User | Count |
---|---|
34 | |
18 | |
18 | |
18 | |
8 |