ExtremeSwitching (VSP/Fabric Engine) - Page 30 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Mutlicasting VOSS only

Using 5420 as edge device, running VOSS 8.10.0.0. One vlan (33) is for multicasting. Currently both the sending unit and receiving unit are on the same switch, and both ports are on the same vlan. The two ports are untagged. The multicasting is worki...

Onboarding VLAN no connectivity

Hello,We're having an issue in our onboarding VLAN.Since we use IS-IS authentication, a newly connected device on an autosense port will get auto-sense state NNI-ONBOARDING and not be immediately allowed into the fabric.The problem that we have is th...

IS-IS between Fabric Engine devices and EOS (S-Series)

Hi,We are in the process of replacing a number of S-Series routers with 5520s running FE.We have previously replaced our datacentre core routers with VSPs using SPBM. As our network was exclusively using OSPF before this, the core VSPs ended up runni...

Resolved! 4048 onboarding-vlan in VOSS 8.2

Hello,On a new GNS3 VSP switch running VOSS 8.2 all ports are members of vlan 4048 called onboarding-vlan.Haven’t seen this before and I was wondering what it is being used for.Thanks, Klaus

port down because of Link-Flaps

Hi,i have one acces-Switch connectet to the Clsuter with smlt .Switches-type in cluster: VSP8404Access-Switch :ERS4950one port in the Switch Cluster has been down so i have changed the SFP and fiber but Port become not UP agin .what can i do ?thanks

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN