ExtremeSwitching (VSP/Fabric Engine) - Page 2 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! how to set up automatic saving of switch configuration on VOSS switches

Hi Community,I would greatly appreciate it if you could provide guidance on how we can configure our switches to automatically save their configurations at regular intervals. Additionally, if there are any best practices or recommendations that you c...

VOSS SNMP for MLT

Are there any statistics exposed for an MLT, or only its component interfaces? The MLT exists under ENTITY-MIB but nowhere else that I can find with an snmpwalk:SNMPv2-SMI::mib-2.47.1.2.1.1.2.6290 = STRING: "MLT- mizar-d LAG1"SNMPv2-SMI::mib-2.47.1.2...

Removing default SNMPv3 configuration on VOSS 9.x

Hi all,I am attemping to set up some new 5420M switches with VOSS 9.0.0.2 on them. We are using SNMPv3 settings on them and I am attempting to remove the default settings including the SNMPv1/2 settings and the default SNMPv3 intitial user and group....

Resolved! Wifi I-SID through auto-sense

Hi budies,Using auto-sense for months now, I'm asking now why auto-sense wifi i-sid is not yet implemented for whos don't have pleasure of operating Fabric Attach powered AP. Using LLDP TLV type 7 WLAN system capability sent by neighbor AP could be v...

Resolved! FA from VSP 7254 to ERS 4950 displaying individual ports

Hello, I have an ERS 4950 (Ports 1/49-50) connected to a VSP-7254 VOSS Switch (Ports Gig1/17-1/18) using fabric attach. Everything works fine but I was just wondering if this is correct as on the ERS side when I run "show fa elements" I'm seeing the...

Top Kudoed Authors

User

Count

29

15

14

11

5

GTM-P2G8KFN