ExtremeSwitching (VSP/Fabric Engine) - Page 2 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! Multicast is not working over the fabric

I have VLAN 100 and the interface is in the GRT with IP 10.0.100.1. I have VLAN5 in VRF IPTV with IP 10.0.5.1. Here is my relevant config. I am testing multicast on VLAN 5 and VLAN 100. VLAN 100 interface is in the GRT and VLAN 5 is in VRF IPTV. The ...

Resolved! Fabric extend over a set of Exos switches?

This may not be possible, but it would be handy if it is... I have 4 switches on my desk, a pair of 430s running EXOS, and 2 5320s using VOSS. I have 2 laptops, and they connect just fine over the 2 430s in a VLAN, but that was just to test. I was...

Firmware upgrade Best Practice for VSP-8608 , VSP 7254, VSP 4850, ERS 4950, 5420F,5430F switches

We are planning to upgrade the firmware of these below Devices to a latest update Device TypeFamilyPresent FirmwareVSP-4850GTS-PWR+VSP Series6.1.2.05420F-48P-4XE-FabricEngineUnified Switching VOSS7.1.3.0VSP-8608VSP Series6.3.8.0VSP-7254XTQVSP Serie...

Fabric Connect Load balance among more than two paths, possible?

Quick question: Does two Backbone VLANs mean I can only load balance between two PATHs? For example, in scenario that I have three BCBs sw1, sw2 and sw3 and two BEBs sw4 and sw5. Sw4 and sw5 has connections to all three BCBc but not between each ot...

DvR

How to set up a dvr controller and leaf? I tried to set them up but they didn't work.

Top Kudoed Authors

User

Count

29

17

16

15

5

GTM-P2G8KFN