Dear All,
I am new to extreme fabric. I need to configure DHCP server & relay on single extreme fabric switch 5520. I gone through FabricEngineUserGuide_9.0_UG but not getting much idea on it as DHCP server is new feature introduced on 5520 from 9.0 release so unable to find any examples/use cases.
Here is what I want to achieve --
There are total 5 vlans (except vlan 200 which is switch management vlan) for which I need to configure DHCP server as well as relay on single 5520 switch. I need 5520 to act as a server also as relay so that end device connected in my topology should get DHCP IP from 5520.
Please find attached topology diagram.
Vlan 100 - Switch-MGMT - 172.16.100.1/24
Vlan 200 - AP-MGMT - 172.16.200.1/24
Vlan 8 - Student-Vlan - 172.16.8.1/22
Vlan 20 - Staff-Vlan - 172.16.20.1/24
Vlan 30 - Guest-Vlan - 172.16.30.1/24
Vlan 40 - LAN - 172.16.40.1/22
