ExtremeSwitching (VSP/Fabric Engine) - Page 35 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! VOSS - Clear interface / port configuration

Hi,Just wondering if there is an easy way in VOSS to clear all the configuration associated to a port and interface.A scenario is that a previous port was configured as standard MLT for an uplink port, using LACP, has 30+ VLANs configured, plus vario...

Resolved! Firmware VSP 7024XLS (v10.4.0.003)

Hi All,How can I get or download the firmware for AVAYA VSP 7024XLS (v10.4.0.003)As listed, this device has been EOL.FW:10.3.1.5 SW: v10.4.0.003

trouble with sflow and voss

When I enable sflow on the switch that is directly attached to the analytics / vmware host, it works just fine. The packets get dropped when sflow is enabled on switches where sflow has to cross the fabric to get to the Analytics engine. The sflow ag...

Resolved! HDMI over IP and VOSS

I'm trying to get a digital signage project working and am running into an issue that I believe is happening when the traffic is passing through the VSP. It worked before we changed our network topology as now all IDFs home-run to the VSP whereas bef...

VS7254

I'm totally new to EN environment; I have a VS7254; anyone know how enable the management port to be able to ping, ssh into - I'm now able to access the switch via several other network interfaces but not the mgmt port.

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN