dabbler
New Contributor III
since ‎09-07-2021
Monday

User Statistics

  • 29 Posts
  • 0 Solutions
  • 4 Kudos given
  • 1 Kudos received

User Activity

I am trying to install a new certificate on a VOSS 9.2 switch and I believe v9.1 onwards supports SHA256. When I use these commands to generate a CSR and sign it with our internal CA using OpenSSL, MS Edge displays an "unsupported certificate format"...
I have installed a new switch stack with 11 AP305c's and 3 460c outdoor APs. None of the 460c APs are booting up, but a 305c boots up no problem on the same cabling.I've made sure inline power is enabled is max output is 30W but now I'm stuck. Any id...
I need to decommission XIQ SE and I'm thinking the first step is to disconnect it from XIQ Cloud.In XIQ SE I initially went to Administration > ExtremeCloud IQ Connection > Configuration > unticked "Enable connection to ExtremeCloud IQ".This changed ...
I have 2 VSPs, VSP1 and VSP2 that have SMLT fibre connections to EXOS switch stacks that use sharing.I built a new EXOS switch stack to replace an existing one, created a new SMLT and all that worked fine. I then disconnected both fibres from the exi...
I have enabled the FTPD boot flag (TFTPD is disabled) on a VOSS 5520 switch and can start an FTP session to it OK. When I try to download config.cfg (or any other file), I get a permission error and nothing downloads.Why can't I download the config f...
GTM-P2G8KFN