Hello, I have an ERS 4950 (Ports 1/49-50) connected to a VSP-7254 VOSS Switch (Ports Gig1/17-1/18) using fabric attach. Everything works fine but I was just wondering if this is correct as on the ERS side when I run "show fa elements" I'm seeing the...
Hello All,I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason.What I have is 2x 8404C 10GB core switches and I wish to use ports 2/23 and 2/24 as a LAG with LACP.I've tried fro...
hello,I want to upgrade some Fabric Engine switches, but I don't want them to restart at the same time. So, when I do upgrade software from XIQ-SE, I put at the device group number as 1, and the download is done one by one, but then the restart is do...
Hi, I've made a quick lab on GNS3 version 2.2.42 and VOSS image 8.10.1.0 GA and made a simple SMLT\vIST configuration between a pair of switches But the vIST remain UP only few minutes and then goes down.Below the screenshot of the console of the two...
Hello, First post here, but long time reader!I just purchased used 7254 XSQ unit, and looks like all the software was removed from the unit. Any ideas of how to find a software for the unit to load it? Obviously don't have a valid support contract wi...
