Extreme Networks

ExtremeNewbie

Hello Community,I have a pair of the VSP 8404C chassis currently linked at 10GbE I believe. I have managed to get hold of 2 x 8418XSQ 16-port 10 Gigabit Ethernet SFP+ and 2-port 40 Gigabit Ethernet QSFP+ Combo ESM cards and have a free slot in each ...

ExtremeNewbie

Hello Community,I am having an issue trying to add a port to our Default VLAN which I have done successfully on many occasions in the past.I have taken the port out of Netlogin (dot1x and mac).I then try to add the port to the Default VLAN as untagge...

ExtremeNewbie · 10-28-2025

Hello Community,Upgraded to 24.7.10.52 for both XIQ-SE and NAC's. I could log into XIQ-SE and did so a number of times. Now, after logging in, I have a page cannot be found please see below with security check in the web address. Any help with thi...

ExtremeNewbie · 09-16-2025

Hello Community, Apologies if this question is in the wrong section.We are using XMC- SE and NAC control in our environment. We are currently testing User and Machine Authentication via Certificates. The User and Machine are domain joined and can a...

ExtremeNewbie · 03-13-2025

Hello Community,We have upgraded from Win 10 to Win 11 and are currently using EAP PEAP as the 802.1x authentication method. I was told this would no longer work with Win 11 and we would need to implement EAP TLS. I understand EAP TLS is not availa...

ExtremeNewbie

@WillyHe thanks for the reply. We are currently maxing out on our 10GbE connection at times hence looking at a 40GbE connection.Thanks,

ExtremeNewbie

@Shaja Thanks for the reply, yes, I know about the distances. I would like someone to advise on how to set this up. I know I will probably have to use a Single Mode fibre cable for the link unless someone knows otherwise. Currently, the distance b...

ExtremeNewbie

@Ty_Izzet thanks for your reply. I managed to fix this by restarting the switch and then using the disable netlogin command for the port concerned for DOT1x and MAC.I am not sure why this did not work initially as I have done this on a number of occ...

ExtremeNewbie · 10-29-2025

@Ryan_Yacobucci - thanks for the email. Yes, the services were restarted and the logs checked. GTAC advised updating to v25.08.13.02. This has resolved the issue.Kind Regards,

ExtremeNewbie · 10-06-2025

Hello Ryan - I have tried as suggested and have a couple of issues.1. The setup as it is, the Rule created for this is not hit and the Authentication attempted is 802.1X see below.2. When I run the Evaluation Tool for this, it comes back as OK and no...

Extreme Networks

User Statistics

User Activity

40GbE backbone - is this possible using the VSP 8404C chassis?

Cannot add a port to Default VLAN

Page not found after logging into XIQ-SE

Local Administrator account and Extreme NAC

XIQ SE and Windows 11 Authentication EAP TLS

Re: 40GbE backbone - is this possible using the VSP 8404C chassis?

Re: 40GbE backbone - is this possible using the VSP 8404C chassis?

Re: Cannot add a port to Default VLAN

Re: Page not found after logging into XIQ-SE

Re: Local Administrator account and Extreme NAC