Where can I find Default VSP & Universal switch Config files.
AnyoneWhere can I find Default VSP & Universal switch Config files so i can configure in advance of equipment arrival.Thank YouLarry_S
Forum Posts
PoE cuts out
We have a site with a VSP 5420F-24P-4XE. This is a parking garage and they're adding some cameras. They're reporting that once they reach more than 11 cameras, plugging in any additional will cause a different switch to lose power. I started a trace,...
MACsec CAK Key Rollover (hitless)
Hello community, do you have an experience with implementing such use case?The requirement is simple, change CAK key on port/profile without interruption of the traffic. Competition calls this feature "MACsec Using Pre-shared Key Hitless Rollover Key...
High In Discards on L3 interface with S8
Hi,Investigating an issue where some packet loss is happening within the local network.Looking into where packets maybe being dropped there is a continual high in discard count on a L3 interface between a VSP and S8. In fact, it is happing on L2 conn...
SMLT with LACP not working (SFP and RJ45)
Hello at all,I try to establish a SMLT connection with LACP.I do have two VSP-7400-48Y-8C VSPs and one Cisco UCS C240 server with 6 network interfaces (4 x 25GBit SFPs and 2x 10GBit RJ45 Ports).On the server side I created a bond with one of the 25GB...
