ExtremeSwitching (VSP/Fabric Engine) - Page 39 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

VSP 7400 PSU Status LED

We have a VSP 7400 and when plugged in, the "!" LED was blinking amber. The documentation only mentions solid amber or off as status options. Does anyone know what the blinking amber means? We left to go to another site and when we came back the swit...

Resolved! VSP 4850GTS 7.1.4.0 and SSH

Hello,I moved a VLAN and its IP into a VRF from the GRT VRF 0 and although I can ping and traceroute to it, it no longer responds to SSH or Telnet?Not aware of having to use the GRT for management in this hardware/software.Thanks,Rob

Fabric Engine with Mgmt CLIP and NAT Firewall

Hello,If the general rule is to use CLIP as management interface for Fabric Engine with Segmented Management Interface when using L3 BEB or L3 non-fabric how can a connection be established using a NAT enabled Firewall?Would we add a Mgmt VLAN and ad...

Identify MAC from BPDU TCs

Hi,we actually have a Fabric core with 4xVSP7400 we activate STP mstp because of an interconnection any to any with a provider.We have 2 core by room and each room as an attach to the provider because of the STP one link is in Forwading and the other...

Where can I find Default VSP & Universal switch Config files.

AnyoneWhere can I find Default VSP & Universal switch Config files so i can configure in advance of equipment arrival.Thank YouLarry_S

Top Kudoed Authors

User

Count

33

18

18

17

7

GTM-P2G8KFN