ExtremeSwitching (VSP/Fabric Engine) - Page 41 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Universal 5420 switch

Having trouble upgrading software with FTP. Not use to using an FTP server. Installed filezilla and 3cdaemon but can't get it working. On Filezilla the switch flash content isn't showing up for me to drag new firmware into. Any suggestions

VSP Edge Deployment Guide, without NAC

Abstract: This guide describes the steps needed to automate the deployment of a VSP switch running VSP Operating System Software (VOSS) 8.3 or later in customer environments where the use of Network Access Control (NAC) is not desired. The process us...

VSP 7400 PSU Status LED

We have a VSP 7400 and when plugged in, the "!" LED was blinking amber. The documentation only mentions solid amber or off as status options. Does anyone know what the blinking amber means? We left to go to another site and when we came back the swit...

Resolved! VSP 4850GTS 7.1.4.0 and SSH

Hello,I moved a VLAN and its IP into a VRF from the GRT VRF 0 and although I can ping and traceroute to it, it no longer responds to SSH or Telnet?Not aware of having to use the GRT for management in this hardware/software.Thanks,Rob

Fabric Engine with Mgmt CLIP and NAT Firewall

Hello,If the general rule is to use CLIP as management interface for Fabric Engine with Segmented Management Interface when using L3 BEB or L3 non-fabric how can a connection be established using a NAT enabled Firewall?Would we add a Mgmt VLAN and ad...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN