Hi team!!!!I have an old configuration in customer over ERS based in ADAC, the por is in customer VLAN (no EAP) and the voice VLAN is added with ADAC when IP Phone is connected (port in untagPvidonly with user VLAN as PVID).Now Ill change to VSP (uni...
Hi All,We are planning to add a redundant CORE and FW to the current setup of our client using VIST for the CORE to be clustered and then for the CORE to FW connection we're going to use MLT and LACP for added resilience if ever one port goes down an...
Having trouble upgrading software with FTP. Not use to using an FTP server. Installed filezilla and 3cdaemon but can't get it working. On Filezilla the switch flash content isn't showing up for me to drag new firmware into. Any suggestions
Abstract: This guide describes the steps needed to automate the deployment of a VSP switch running VSP Operating System Software (VOSS) 8.3 or later in customer environments where the use of Network Access Control (NAC) is not desired. The process us...
We have a VSP 7400 and when plugged in, the "!" LED was blinking amber. The documentation only mentions solid amber or off as status options. Does anyone know what the blinking amber means? We left to go to another site and when we came back the swit...
