ExtremeSwitching (VSP/Fabric Engine) - Page 46 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Soft loopback for RFC 2544

New to the Extreme VSP world and I have been researching to see if it is possible to create a soft loopback on a VSP7400 for a specific i-sid to so we can run an RFC 2544 benchmark test across our fabric without having a physical endpoint on the othe...

SMLT Square - Force traffic down VLAN UNI instead of SPB (NNI) links

We are testing multiple p2p circuits between DC's for the sake of the test we have created VID 50 and placed an IP on these vlans to ping across this circuit for connectivity.The current DC has prod traffic that is being sent down existing NNI's 2/19...

Resolved! VRRP Between to vIST pairs

We have 2 data centers. Each has a vIST pair. We have a few VLANs that are shared between the sites. Will running VRRP on these 4 switches cause issues? My understanding is that it will be fine as long as the I-SID is configured on each switch.

Resolved! How to configure a fabric port for tagged and untagged traffic

Hello,I have a question on how to setup a port for tagged and untagged traffic with ISIDs on our fabric setup.We use the following settings to create an untagged port :For example port 1/13 and ISID 500100(=VLAN 100) #show vlan members 1 #vlan member...

Resolved! Upgrade Path VOSS 6.1.2.1 to 8.5.1.0

I have over 100 VSP Switches to upgrade and am looking to confirm how I get from 6.1.2.1 to 8.5.1.0Are there any steps or do I go straight to it?Thanks!

Top Kudoed Authors

User

Count

34

18

18

17

7

GTM-P2G8KFN