ExtremeSwitching (VSP/Fabric Engine) - Page 72 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! Access VSP with local account when RADIUS is enabled or has a problem, like Failsafe account in EXOS

Hi,Is there a means in VOSS to either still allow local accounts access to a switch, or something similar to the Failsafe account in EXOS, when you have RADIUS configured?The advantage to the failsafe account in EXOS meant you always had a means to l...

Resolved! Run both VRRP v2 and v3 at same time for migration as per RFC5798

Hi,In the process of migrating an S-Series core to VSP. The S Series is running VRRP v2, but would like to make use of v3 to take advantage of the following:Milliseconds failover vs secondsIPv6 supportIncrease v2 limitation of 254 instances on VSPRFC...

Resolved! 7254XSQ SMLT/LACP to Cisco

Hello. I’m trying to get an LACP link to come up to a Cisco. I’ve spent too much time looking on Google without the most helpful of results so I’m hoping someone here can help. Here is some of the relevant configuration… The interfaces on the Cisco: ...

Resolved! VOSS 8.2.7 Port lock when booting

Hi CommunityI am in the process of deploying 50 VSP7200's.They are setup in SMLT Pairs.We have noticed that during the boot process the ports that has "no shut” configured is shut down until the vIST is established:1 2021-02-20T13:31:52.575+02:00 sw-...

VSP: delete MAC entry selectively

With VOSS command “vlan action VLAN-ID flushMacFdb” i can delete ALL mac-addresses of a specific VLAN. How can i delete only one specific mac-address from FDB?BR

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN