Hi,Recently seen a configuration being deployed that used the same value for both the SMLT Virtual BMAC and the LACP SMLT system ID, of say, 0200:00:41:ff.I have for example used these values. believe these where taken from the configuration guide or...
Hi,Have been told that it is quite routine to redistribute OSPF routes into ISIS and visa versa. In my topology OSPF is used as routes are exchanged with external firewalls.Initially my thoughts where that I just needed to redistribute ISIS into OSPF...
Hi,Apologies if this is a simple question.Have a S8 network that is being migrated to VSP’s. The legacy network predominantly uses OSPF.The question I have is with the new network built on SPBM / IS-IS fabric using GRT (IP Shortcuts). That means I wi...
Hello, I am trying to connect a x460G2 stack to a VSP7400 cluster using this configuration with no luck.While both links are up on both sides communication is not happening.x460G2enable sharing 1:49 grouping 1:49,2:29 algorithm address-based L2 lacp ...
Hello everyone, When connecting VSP7400 - x450G2 - x440G2 in one line I am having issues. Phones on the x460 and the x440 cannot find their TFTP server for instance but everything works fine when connected like this: VSP7400 - x450G2VSP7400 - x440G2...
