ExtremeSwitching (VSP/Fabric Engine) - Page 81 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! Network disruption VSP8600

I’m using 4 VSP8600 in a SPBM-Configuration. Today we experienced a network disruption although no configuration changes were made. The logs are full of these:************************************************************************************ Comma...

Resolved! VSP 7400 Password Reset

Hello everyone,to perform a PoC we have received a VSP 7400-48Y (VOSS 8.1.5.0). The device was already used for PoC at other customers. Unfortunately the password was not reset, so we have no management access.How can the password be reset with such ...

Resolved! Convert JUNOS config to VSP

We are replacing 30+ Juniper routers with VSP’s, does anybody have experience converting the configurations? It would be awesome if there was a converter that can input the Juniper config and output VSP commands. (I believe PAN has a converter from...

Resolved! Force IP Vlan up when no active ports on VSP8400

Hi, I have an VSP8400 that we are changing our WAN connection which requires me to connect it to an ERS4926 as an intermediary (We are implementing Fabric Extend VID which requires an external switch to allow the SPBM translated BVID and wan to shar...

Resolved! Enabling DVR without leaf node, and why it reserves VLANs 3500 to 3998

HIIn the process of building a small network across three DC locations. Each DC is using 2x VSP4900’s in each location as a RSMLT cluster. Intend on using DVR across each of the sites, predominantly based on the details provided in the Automated Cam...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN