A VSP supported campus requires an Upgrade.The Campus is highly utilising multicast traffic.Looking for information on Multicast traffic traversing the Fabric when the BCB and BEB are running differing Voss version for a period of time.
HiHoping someone more clever then myself can help me workout why a route on the Palo Alto shown below (10.119.71.0) is add a route via the EXOS devices on the EOS switches as you would expect, but I am not seeing anything via the VSP.I think its to d...
Curious If anyone else is having this exact issue using VOSS 8.3 in GNS3, write mem, save config will not save a valid config file, If you reboot the virtual appliance it boots up in a defaulted state. The following fixes the issue and allows you to ...
Hi All TLDR: We cannot get S-Tag vlans to pass over the Fabric between our two VSP 7400 switches. We have the following deployed in our network; 2 x Extreme VSP 7400 Software version 8.0.5.1These are joined by two 100Gb cables.ISIS is enabledISIS Spb...
Hoping someone can confirm or clarify the uses for the 2 QSFP28 ports on the front of the VSP5520 switches. From what I’m reading, those ports are basically unusable when using VOSS in fabric mode.
