cancel
Showing results for 
Search instead for 
Did you mean: 

mgmt clip IP not accessible

mgmt clip IP not accessible

gaurav-pandya
New Contributor II

Hello,

We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CLIP IP. But CLIP IP is not accessible from network. 

Do I need to put default route on the switch to get it working? How I can manage those switches?

2 REPLIES 2

Ludovico_Steven
Extreme Employee

If you configured a mgmt CLIP, maybe you forgot to add this config line ?:

router isis
    spbm 1 ip enable
exit


 

EXTR_Paul
Extreme Employee

If the switch is not a L3 device then the CLIP address will not be reachable. 

you will need to configure a VLAN Mgmt Address.

 

here is an example

mgmt vlan 192

ip address 192.168.2.43/24.  / just an example

ip route 0.0.0.0/0 next-hop 192.168.2.1 weight 10

enable

 

 

GTM-P2G8KFN