Extreme Networks

gaurav-pandya

Hi,We are planning to put 2 EXOS as WAN switches in front of firewalls. We have 2 firewalls in HA mode. WAN design will look like attached diagram. I have couple of queries.1. MLAG configuration is must for this design?2. If MLAG is configured, ISC l...

gaurav-pandya · 02-12-2024

Hello,We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CLIP IP. But CLIP IP is not accessible from network. Do...

gaurav-pandya · 08-29-2023

Hello All,We have already extreme switches 5520 VOSS platform running in vIST mode and connected to firewall (with LACP) on LAN side. We want to achieve redundancy on DMZ and WAN side as well. I am attaching diagram for reference. We are planning to ...

gaurav-pandya

Thanks Keith for sharing information.Our agenda is to enable STP as well. We have 2 link from same ISP and it will be connected to 2 switches (In MLAG). So one link should be blocked. My question is ISC link will pass BPDU?

gaurav-pandya · 03-08-2024

Hi,Routing is already in place. My colleague visit site today and give me console of switch. First, I will try command "spbm 1 ip enable"

gaurav-pandya · 08-31-2023

Ok Thanks

gaurav-pandya · 08-30-2023

Hi,We are already using LACP MLT config on 5520 connected to firewalls with LACP on LAN side. It is working with no issue.My question here is should I use vIST or simple LACP design for DMZ.

Extreme Networks

User Statistics

User Activity

EXOS switches to firewalls design

mgmt clip IP not accessible

VOSS redundancy design query

Re: EXOS switches to firewalls design

Re: mgmt clip IP not accessible

Re: VOSS redundancy design query

Re: VOSS redundancy design query