MLAG issue

[Alok_Shukla]

we want to createing MLAG between 2 switches X620. During MLAG creation does IP of all VLAN between 2 switches be same using or same subnet range using.
Suppose that 2 switches(X620) we have and we have 5 vlan and there vlan-IP applied on switch-1. Does IP of all vlan's of switch-1 would be same using on switch-2 or any same subnet range.
Switch-1(X620)
VLAN2=192.168.1.2
VLAN3=10.10.10.1
Switch-2(X620)
VLAN2=192.168.1.2
VLAN3=10.10.10.1

[Alok_Shukla]

How do we create root bridge for Switch-A to vlan-1 and root bridge for Switch-B to vlan-2 in MLAG?

[Stephane_Grosj1]

Starting with 16.1 (16.2?), you have Fabric Routing to do that active/active VRRP without the ACL trick.

[Sushruth_Sathya]

Active-active can be used. You will need to write an ACL to block the VRRP advertisements in order to achieve this. Andrew has attached a link to an article earlier in this thread.

[Andrew_Imam]

For the ISC links between the MLAG peers, you can create an LACP LAG

[Alok_Shukla]

For creating ISC between 2 switch which LAG algorithm as per condition?