Extreme Networks

Dileep · ‎08-12-2019

I need oid for cpu and memory utilization for vsp 7k and 9k.

SaharYacout · ‎04-22-2021

@Markus Nikulski Appreciate your response, however my issue was that I needed to know what OIDs to search for when I need to snmpwalk to know memory and cpu utilization and not how to do that.

I have found the OID that served my switches to be

- 1.3.6.1.4.1.45.1.6.3.8.1.1.13 # s5ChasUtilMemoryAvailable "This object returns free RAM of unit in megabytes "
- 1.3.6.1.4.1.45.1.6.3.8.1.1.12 # s5ChasUtilMemoryTotalMB "This object returns the total RAM of unit in megabytes "

Using the above 2 for example got me the used memory

and for cpu i used 1.3.6.1.4.1.45.1.6.3.8.1.1.5 # s5ChasUtilCPUUsageLast1Minute " percentage of CPU used in last 1 min"

View solution in original post

Dileep · ‎08-19-2019

Hi team,
Kindly provide the same.

Regards,
Dileel

Dileep · ‎08-19-2019

Hi team,

kindly provide MIB file for CPU utilization and Memory Utilization for VSP 7254 and VSP 9012 switch.

Regards,
Dileep

Dileep · ‎08-18-2019

Hi team,

Kindly provide the same.

Regards,
Dileep

Dileep · ‎08-17-2019

Hi team i need mib file for cpu utilization and memory utilization.
We have vsp 9012 and vsp 7254 pls share for both.

Regards,
Dileep

Dilraj_Singh_Kh · ‎08-13-2019

Hi Elca,

You can check the in and out octets for a port using the OID's below:

In Octets: .1.3.6.1.2.1.2.2.1.10
Out Octets: .1.3.6.1.2.1.2.2.1.16

DILRAJ