01-06-2022 02:20 AM
I've had a to replace a VSP 4850 due to USB issues (Cant save the config) This VSP is one of my Core switches.
A new switch has arrived from Extreme and I've upgraded the base image to 7.1.9.0 and I've restored from backup the same config that's on the broken switch.
Something in the back of my mind is saying that if I swap them out the fabric will see a duplicate sys ID/nickname and wont let the new switch join.
spbm 1 nick-name 0.01.02
system-id 00bb.0001.0200
Is there a command to allow the new switch be accepted by the fabric?
Solved! Go to Solution.
01-07-2022 05:13 AM
01-06-2022 03:24 AM
01-07-2022 05:13 AM