segmented management on 5520 running VOSS

[Chi]

Hi, has anybody gotten a 5520 running VOSS and acting as a router with two routed interfaces (VLANs with IPs) to have the segmented management VLAN be accessible from both sides of the router?  I created VLANs A and B on the 5520, assigned (public, routable) IPs to them, and then created a segmented management VLAN, and gave it an IP on the same subnet as VLAN A, with VLAN A’s IP address as it’s default route.

I can SSH to the segmented management VLAN address, but ONLY when I’m physically connected to anything on VLAN A side of the router, including devices going through another router that connects the VLAN A.  Anything on VLAN B or connected to the VLAN B side, cannot SSH to the segmented management VLAN address.

[EXTR_Paul]

With segmented mgmt with a VLAN the IP is treated just as a mgmt address.  Not a routed address.  You need to make sure that you give the MGMT VLAN IP a default route.

4901:1(mgmt:vlan)#ip route ?
  {A.B.C.D/X}  Ip address/subnet mask
  {A.B.C.D}    IP address
4901:1(mgmt:vlan)#ip route