ExtremeSwitching (VSP/Fabric Engine) - Page 33 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

VSAs for VOSS Switches

Hi - does anyone have the VSAs needed to push down to VOSS switches to configure multiple VLANs on a port after a client authenticates. We are using XMC to assign dynamic vlans. The use case is when we plug in an Aruba WAP we need to assign a defau...

Resolved! Can the same VLAN ID be configured in multiple VRFs in VOSS?

Hi,I would like to configure 2 VRFs on a VOSS / Fabric Engine device running 8.10.2.We need to configure the same VLAN numbers in each VRF, ie both will have separate instances of VLANs 10, 11 & 12.Is this possible? If yes, how can I configure it, as...

Resolved! Visio Stencil for VSP switches

Hi, I summarize all of the VSP switches and make the material documents.And I confirmed the visio stencils from the following URL but there was no the rear-view. https://www.extremenetworks.com/support/visio-stencils/ Are there a visio stencils for ...

VSP 4850GTS UBoot update

We have a VSP 4850GTS-PWR+ with a corrupt USB. Need to upgrade the UBoot software. Downloaded the update from Extreme, but I'm unsure how to transfer the file from my PC to the switch? The instructions don't really say:"Upgrade the boot loader image:...

Mutlicasting VOSS only

Using 5420 as edge device, running VOSS 8.10.0.0. One vlan (33) is for multicasting. Currently both the sending unit and receiving unit are on the same switch, and both ports are on the same vlan. The two ports are untagged. The multicasting is worki...

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN