SSH from VSP to another device

[bfaltys]

We have a switch that someone put in the field, but we cannot reach it. I added a layer 3 vlan interface on the VSP on site & can ping it. Is it possible to SSH from the VSP? I can see the other switch via LLDP & there is also an ISIS adjacency. I'm wondering if the gateway isn't configured.

[bfaltys]

Strangely, I can ping the IP, but when I try to SSH I get an unreachable message.

VSP4900:1>ping 10.1.1.254

Sending ping in context grt
10.1.1.254 is alive
VSP4900:1>
VSP4900:1>
VSP4900:1>ssh 10.1.1.254 -l admin
Trying 10.1.1.254 ...
Host 10.1.1.254 is not reachable.
VSP4900:1>

[bfaltys]

Nevermind. If you exit down to exec mode the option is there.

VSP4900:1>?
Exec commands:
clear-stats Clear port statistic counters
clock Clock configurations
cpld-install
debug-file Command To delete debug files
dump Dump the ar table
dvr DVR configuration commands
eapol Set EAPOL configurations
enable Turn on privileged commands
exit Exit from the EXEC and end the current session
file-checksum Calculate or compare MD5/SHA512 digest for a file
help Description of the interactive help system
ip IP configuration features
ipv6 IPv6 configurations
isis Isis configuration command
l2 L2 commands
line-card Perform trace commands for IO and SF cards
linktrace Linktrace command
login Re-login to a different access level
logout Logout of system
loopback Loopback command
ls List files in a directory
manualtrigger Send triggered update
ping Ping Hostname / IP
pwc Print current working level
quick-config-mgmt Quick setup for management interfaces
remove Remove file or directory, with wild card pattern
show Show running system information
slot Set slot state reset
ssh Open ssh client session to a remote host
tacacs Tacacs protocol configurations
telnet Telnet to a remote host
terminal Terminal commands
trace Trace file config