Suggestions for Tagging a management vlan over an ISIS/SPBM link.

[ItsJaredKushner]

Hello!

I have a scenario that involves two UISP antennas that will be linking together a 5420 to a 5320. 

I'm able to establish adjacencies with no issues, but unfortunately the unifi p2p's do not include a separate physical management interface. 

Is there a way to tag a management vlan over an ISIS/SPBM interface? 

[Niko_P]

Hi, 

you can enable: 
"boot config flags nni-mstp" 

This allows you to add VLANs (other than backbone-vlans) to an NNI link (isis interface).

BUT the added VLANs must not have an I-SID.

https://documentation.extremenetworks.com/VOSS/SW/88/VOSSUserGuide/GUID-57F49ED5-31BA-411B-AD8A-CFCB...
https://extreme-networks.my.site.com/ExtrArticleDetail?an=000112021

[ItsJaredKushner]

I saw that one in the documentation too. I'm sure this would solve the issue but I'm thinking i would have to do this on every single upstream switch to accomplish this. 

Thank you.

[renewalls09]

Interesting scenario. Using Fabric Extend sounds like a practical approach for carrying management traffic while keeping the SPBM fabric design clean. Thanks for pointing in that direction. www yearbookavenue com

[Raul_Carbonari]

Hi,

I imagine that using Fabric Extend you could achieve what you are looking for

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000078226

Greetings

Raúl Carbonari