this will be dependant on what version of VOSS code is the VSP running. "Show software" will tell you. You will want to be running VOSS 8.2 or higher. Today 8.10.1 is the most current release.
First you need to set the flags.
CONFIG T
BOOT CONFIG FLAG ? //// Then you need to enable all the services you want to enable for remote management. TELNET, SSH, SNMP HTTPS etc etc...
Next you need to set your IP interfaces that will reply to management. If you are running VOSS 8.2 or higher it will look like this.
OUT OF BAND CONFIG.......
mgmt oob
ip address 155.55.55.55/24
ip route 0.0.0.0/0 next-hop 155.55.55.1 weight 20
enable
exit
MGMT CLIIP CONFIG:::::::::::
mgmt clip vrf GlobalRouter
ip address 10.10.10.10/32
exit
VLAN IP CONFIG ::::::::::::::
mgmt vlan 192
mac-offset 1
ip address 192.168.2.43/24. ((((NOTE, must match the IP in the VLAN))))
ip route 0.0.0.0/0 next-hop 192.168.2.1 weight 10
enable
exit
