cancel
Showing results for 
Search instead for 
Did you mean: 

VSP 7254 XSQ Software Upgrade fails

VSP 7254 XSQ Software Upgrade fails

poddy
New Contributor II

Hi all, I’ve got an issue upgrading my VSP 7254 XSQ software. I’m getting an error message which doesn’t really tell me much. Has anyone had any experience with this? 

e4db7eeaca644233a380e4825be540d9_4edcab41-9ad9-40d5-a237-569bf20559a4.png

I’m currently sitting on an old software release VOSS7K.6.0.1.1.GA (Primary Release), and I am attempting to go up to 8.3.0.0; 

I tried doing the “next major upgrade up” from 6.0.1.1 to 6.1.0.0 but that didn’t help. Still saying the same thing. 

Slot 1: Could not update Kernel image for flash bank 1. IM error code: -1

 

Any info will be greatly appreciated. 

1 ACCEPTED SOLUTION

poddy
New Contributor II

It turned out to be a brain error on my end. I was indeed not following the proper upgrade path. Started again at 6.0.x->6.1.x and then followed it all the way to 8.3 - no problems. 

 

Thanks all. 

View solution in original post

5 REPLIES 5

Dan15
Contributor

Have you verified the upgrade path is correct?

I would say in your case you would have to do:

6.0.x->6.1.x->7.1.x->8.1.x->8.3.x

GTM-P2G8KFN