cancel
Showing results for 
Search instead for 
Did you mean: 

VSP Edge Deployment Guide, without NAC

VSP Edge Deployment Guide, without NAC

Ludovico_Steven
Extreme Employee
Abstract: This guide describes the steps needed to automate the deployment of a VSP switch running VSP Operating System Software (VOSS) 8.3 or later in customer environments where the use of Network Access Control (NAC) is not desired. The process uses a combination of automation features in VOSS Fabric Connect and in ExtremeCloud™ IQ - Site Engine onboarding.
1 REPLY 1

AHouston
New Contributor II

That document is amazing, thanks Ludo.

I'm looking to set up Fabric to the edge incorporating NAC, do you happen to have documentation that includes NAC i-sid configuration?

 

For reference our environment will be utilizing;

- 4x VSP 7400 for core/distribution (routing is being done here)

- 2x VSP 7400 for storage

- ~90 5420 for edge

- ~360 APs (305, 460 and 510s)

- XIQ, XIQ-SE, 2x NAC and likely Fabric manager and Analytics

 

Current environment is running over Cisco with 20 extreme switches running EXOS. I have configured NAC to use MAC auth and push VLANs to the current EXOS switches.

GTM-P2G8KFN