02-11-2021 07:59 PM
I have 30 ap's 305c-wr but it does not have extreme cloud iq, nor a controller, it only has HiveManager but I have already checked that it is not compatible with these computers. The ap's 305c-wr or those of the Cloud family can be configured in standlone mode and configure an ap to act as controller mode. Or what could be a better solution to not waste these equipment?
Solved! Go to Solution.
02-11-2021 10:51 PM
Cloud and on-premise. Here’s some literature that may help: https://cloud.kapostcontent.net/pub/e2a6e40e-443f-4b44-ac84-526983d92b39/extremecloud-iq-data-sheet?...
On-premise (installed on local server) is subscription based.
You can’t adopt these APs by 3rd party controllers.
Thank you,
Chris
02-11-2021 10:51 PM
Cloud and on-premise. Here’s some literature that may help: https://cloud.kapostcontent.net/pub/e2a6e40e-443f-4b44-ac84-526983d92b39/extremecloud-iq-data-sheet?...
On-premise (installed on local server) is subscription based.
You can’t adopt these APs by 3rd party controllers.
Thank you,
Chris
02-11-2021 10:31 PM
ok, another question, these device (type C) only work at cloud level, or can they also adapt to other modes?
02-11-2021 10:21 PM
You can use it to onboard APs without requiring licenses. It’s a toned down version of XIQ Pilot but has the basic features that will allow you to onboard and use your APs.
This will provide you with a quick view of the differences:
02-11-2021 09:58 PM
excuseme Christoph S.
ExtremeCloud IQ Connect is it a trial version?
or does it have a price?
or is there already a license with my AP?