cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure the radius authentication(802.1x) in Nac appliance?

How to configure the radius authentication(802.1x) in Nac appliance?

Prabhu_M1
New Contributor III
Using internal DB How to configure the radius authentication in NAC Appliance?
5 REPLIES 5

Zdeněk_Pala
Valued Contributor III
you need to change basic AAA config to Advanced = https://emc.extremenetworks.com/content/oneview/docs/control/access_control/docs/l_ov_ia_at_aaa_conf...

Then it is easy.

Good luck
Regards Zdeněk Pala

Keene__Scott
Extreme Employee
Hello,

Configuration is done via NAC Manager or Extreme Management Center.
What do you mean by internal db?

Regards,

Scott Keene
NMS/NAC Support

Try this URL to review the NetSight Help on this topic.
*Be sure to change the IP in the URL to your NetSight server's IP:

https://1.1.1.1:8443/Clients/help/content/nachelp/docs/nac_at_aaa_config.html

Click on Advanced AAA Configuration when that page comes up.

If you are referring to terminating 802.1x lcoally at the NAC then you need to create an Advanced AAA Config and setup an LDAP Config as well, then tie the LDAP Config to a line in the AAA that is set with an Authentication Method of LDAP Authentication.

Thee are some NAC Manager screen shots in this article:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-authorise-Windows-domain-user-compu...

You can also use the NetSight Help.



Regards,

Scott Keene
GTM-P2G8KFN