Hi there,
we discovered some Switches are sending "RADIUS Accounting Errors" to our NetSight. They are look pretty much like this:
AAA[13]RADIUS Attempted the configured number of retries (3) to accounting server #2 without a server response for 00-XX-XX-XX-XX-XX (username '00-XX-XX-XX-XX-XX') on port tg.13.3
The most messages are from our bonded S8-Chassis, which obviously got the most users connected.
The Server "number" varies as well as the ports, but all of our 5 NAC Gateways are up and running... and we don't see other errors on the network.
The switch sends about 20-30 Messages every few minutes.
Does anyone know what this Messages could cause or exactly mean?
Thanks in advance,
Martin
This is our RADIUS Config:
# radius
set radius enable
set radius timeout 10
set radius server 1 10.233.23.21 1812 ㊙️
set radius max-sessions 6000 1
set radius server 2 10.233.23.22 1812 ㊙️
set radius max-sessions 4500 2
set radius server 3 10.233.23.23 1812 ㊙️
set radius max-sessions 4500 3
set radius server 4 10.233.23.24 1812 ㊙️
set radius max-sessions 6000 4
set radius algorithm round-robin
set radius accounting enable
set radius accounting server 1 10.233.23.21 1813 ㊙️
set radius accounting retries 3 1
set radius accounting timeout 10 1
set radius accounting server 2 10.233.23.22 1813 ㊙️
set radius accounting retries 3 2
set radius accounting timeout 10 2
set radius accounting server 3 10.233.23.23 1813 ㊙️
set radius accounting retries 3 3
set radius accounting timeout 10 3
set radius accounting server 4 10.233.23.24 1813 ㊙️
set radius accounting retries 3 4
set radius accounting timeout 10 4
