Radius Authentication configuring switch x440 as a client in NPS-Windows Server 2008 Enterprise.

[Helio_Jose_Erha]

Good afternoon.
I trying to accomplish Radius authentication, configuring switch x440 as a client in NPS-Windows Server 2008 Enterprise.
How should the settings on XOS and the NPS?
We have already used successfully authenticating switches EOS.
I thank the support.

[Helio_Jose_Erha]

Hi Henrique,

The authentication is working, however the Active Directory user always gets RO permission. How to have RW permission?
No need something similar to Filter-Id, as used with EOS switches (Enterasys: version = 1: mgmt = rw)?

Thank you

[Henrique]

Hi Helio,

If you need to authenticate the users to get access to manage the switch, you can use the commands below for the switch:

configure radius mgmt-access primary server client-ip {vr vr_name}
configure radius mgmt-access primary shared-secret
enable radius mgmt-access

For NPS, you can find an example in the GTAC Knowledge link below:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Windows-2008-NPS-for-auth...

[Gowtham_Elamuru]

Hi, Can you please send the document link again

[Ronald_Dvorak]

I was also looking for that as I'd need to test it in my lab.

Here a article that I've found - haven't tried it today as I run out of time....

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-802-1x-based-Netlogin-wit...