SSH users with RADIUS authentication not getting administrator privileges

[Jairo_Rojas_Her]

Thanks Patrick

I have problems with SSH2 authentication on summitX-in version 16.1.3.6 16.1.3.6 1-2.cos-patch-patch 1.2. When authenticates about Radius with a user who has administrator permissions not let modify read-only changes. Version may have problem?

This the more information about firmware last intalled
# sh ver images
Card Partition Installation Date Version Name Branch
------------------------------------------------------------------------------
Switch primary Fri Nov 7 18:35:13 UTC 2014 15.5.3.4 summitX450-15.5.3.4.xos v1553b4
Switch secondary Thu Apr 14 10:13:01 COT 2016 16.1.3.6 summitX-16.1.3.6-patch1-2.xos 16.1.3.6-patch1-2
Switch secondary Thu Apr 14 10:15:20 COT 2016 16.1.3.6 summitX-16.1.3.6-patch1-2-ssh.xmod 16.1.3.6-patch1-2

Note: This conversation was created from a reply on: NO MESSAGE DECODE; Missing component "AAA.RADIUS" v38.1.

[Drew_C]

You may find some additional helpful information in this thread:
https://community.extremenetworks.com/extreme/topics/radius-authentication-configuring-switch-x440-a...

[Jairo_Rojas_Her]

Not only have we proven this to be installed as new. Tomorrow we will be testing with other devices

[Patrick_Voss]

Hello Jairo,

Brad is asking if the same user experiences the same issue on a different switch.

[Jairo_Rojas_Her]

The problem is with the version 16.1.3.6 Patch 1-2 when required to manage the switch by SSH2 not allowed to enter as administrator only shows reading options.