10.41 feature discussion

[Ronald_Dvorak]

Let's discuss some of the new functions of v10.41.

I've upgraded yesterday but I already love the AP remote shell feature - thanks guys, now I don't need to search for the AP IP and open another window to ssh to the AP.
 

I've a question about the http AP image upgrade function - does this now solve the issue for AP software upgrades if the controller is behind a NAT device ?

https://extremeportal.force.com/ExtrArticleDetail?an=000091402

Cheers,
Ron

[Anonymous]

Hi Ian,

Wonder if this is related to a DFS event? You may have already rolled back now, but you could have enabled DFS event notification and see if the two are related:

https://extremeportal.force.com/ExtrArticleDetail?an=000080837

Thanks.

[Ronald_Dvorak]

FYI,

I can't recommend a upgrade to v10.41.01 because of some major flaws with ACS / channel width - fix is planned for 10.41.02.

[Ronald_Dvorak]

I've tested the software for about 60min and the result is .... unuseable.

1) If you set the 5GHz radio channel to auto also the channel width is changed to auto and there is nothing you'd do about it (802.11ac APs).

You are only able to change the width to 40 if you set a static channel.

2) AP3825e
Default AP setting channel width is set to 40 but a new AP comes up with auto.

[M_Nees]

10.41.02.0014 is out!

wns0018546:
Adjust default configuration template to 20 Mhz channel width for AP radios

[M_Nees]

Is this maybe already fixed in 10.41.01.0082 - wns0019430:

Addressed issue after an upgrade where if auto channel selection is used, it would rerequest a new channel and channel width. The expected behavior has been corrected
to preserve previous channel and channel width. Also adjusted UI logic when channel
is set to ‘Auto’ to only allow channel widths of ‘Auto’ or ‘20MHz’.

Or do you have another issue ??