3935i LACP with same switch possible ?

[Pascal_Lurquin]

We are using 3935i APs

They are connected to only one port : I saw the LOW mode in the log

We would like to use it with performance: we have to use TWO ethernet ports

Is it possible with only one POE switch X440-48P

Thanks

[Ronald_Dvorak]

In case the KB article is correct and also is valid for the AP3935i then just turn PoE off on one switch port and configure the LAG and that should work.

[Narayanan__Kart]

Hi Pascal,

If the Ethernet ports of the AP are connected to separate switches in a stack, then the switches in the stack can provide both POE and LAG functionality simultaneously to the AP.

Regards,
Karthikeyan

[Narayanan__Kart]

Hi Pascal,

I dont think we can connect both LAN ports on the same switch. Please check the below article for more information:

https://gtacknowledge.extremenetworks.com/articles/Solution/AP3825-cannot-be-powered-when-connecting...

Regards,
Karthikeyan

.