cancel
Showing results for 
Search instead for 
Did you mean: 

Ap2660 Login issues, default password not working

Ap2660 Login issues, default password not working

David_Claeson
New Contributor
I have many legacy ap2660 devices, and they are set to get a dhcp address, then we hard code the wireless controller (via telnet). I have found that many of these devices do not let me log into them with the default admin / new2day credentials. We have not changed the password, and I have held the red reset button down for about 30 seconds. Even after that I still cannot log in. Are there other credentials that I can use to log in, or is there another way to connect to these to perform administration tasks?

Thanks,
Dave
4 REPLIES 4

David_Claeson
New Contributor
Great thanks!!!!
Is there a way to mark this answered / solved?



All set and marked.
Doug Hyde
Director, Technical Support / Extreme Networks

Craig_Guilmette
Extreme Employee
Hello David the default password for the 2600 series AP's was admin with e~=2.718 as the password

Hawkins__Bruce
Extreme Employee
You could also try using the following: Username: admin / Password: e~=2.718
GTM-P2G8KFN