CAPTIVE PORTAL IN WS-C35

[Long_Tran]

Hi all,
I creat a Guest Portal Services with guide: https://extremeportal.force.com/ExtrArticleDetail?an=000082158

Network diagram:

Step1: Creat a topology:

Step 2: Creat Role

- Non Authentication Role:

- Authentication Roles:

Step 3: Creat a WLAN Services

Step 4: Creat VNS

Problem: After config. I test by my laptop. My laptop has IP Address. But When I open a web browser and put in any valid webpage address, I can't redirect to the captive portal webpage of the controller.

Please, help me!!
Thanks so much.

[Bill_Handler]

When you connect, what role are you getting - Reports>Clients>

[Ronald_Dvorak]

Please check whether "Use HTTPS for User Connections:" is disabled = remove the checkmark in

GUI > VNS > WLAN services > Guest_Captive > Auth&Acct > Configure >

[Long_Tran]

I disable "Use HTTPS". But I can't redirect captive portal.

[Ronald_Dvorak]

Let's do it step by step.....

1) Make sure that the basic network access is working - bypass the CP
in GUI > VNS > Virtual Network > GUEST
set non-authenticated and authenticated to Guest_Captive_authen
Q: could you access the internet with the wireless client

2) DNS
change the value back in 1)
open a DOS window on the client and ping extreme.networks.com
Q: does the name resultion work = do you see the 104.154.197.154 address

Example:

3) open a browser and go to 10.10.10.10
Q: are you redirected to the portal

4) add another rule to the non-auth role
I can't remember the exact issue but it was necessary to also allow ARP
You'd try whether that helps, add the 0x806 rule....

Cheers,
Ron

[Long_Tran]

Hi Ronald Dvorak, Thanks for help.
1, Make sure that the basic network access is working - bypass the CP
in GUI > VNS > Virtual Network > GUEST. set non-authenticated and authenticated to Guest_Captive_authen --> I can Access Internet
2,

3, open a browser and go to 10.10.10.10 --> I can't redirect to the portal
4, ... Remember please
Thanks.