Client Isolation - Extreme Wireless controller

[Boopaa]

Hi Team,
Does anybody have any ideas of how client isolation can be achieved for users on the same SSID and in the same vlan in Controller. I know other manufacturers have a simple Client isolation feature that will achieve this but I can't find it in Extreme Controller.
My ultimate goal is "Users have to communicate only gateway not others".
Any ideas welcome..!!!

[Rey_Juan_Carlos]

Hi to all, we have to:

Permit only traffic destined to our gateway (MAC_Source/Mac_Dest)

Permit Broadcast (Mac_Dest ff:ff:ff:ff:ff:ff)

Deny all

With this all works fine.

[Nathiya_M]

Hi Boopathy,

Please confirm, is it B@EWC or B@AP topology?

Regards,
Nathiya M

[Nathiya_M]

Hi Boopathy,

Please find the steps below to block wireless client to client traffic on a WLAN.

1. From the Controller/Appliance GUI
2. Select WLAN Menu
3. Select desired WLAN to block MU to MU traffic
4. Click Advanced button
5. Check the box in the CLient Behavior Window Block MU to MU traffic (not supported on Bridged at AP topologies)
6. Click the Apply Button
7. Click Save Button

Reference article below,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-block-wireless-client-to-client-tra...

Regards,
Nathiya M

[Boopaa]

Thank you for the quick response and I will confirm soon..!!