Extreme Networks

Nathiya_M

Introduction:The Wi-Fi Alliance introduced WPA3 in 2018 and it is a successor to WPA2. It was released to address the security limitations of WPA2, such as offline dictionary attacks and KRACK & Kraken attacks. Like WPA2, WPA3 also comes in two varia...

Nathiya_M · 07-19-2019

Hi Rolf, Please check VM adapter settings. set the promiscuous mode to Accept. https://gtacknowledge.extremenetworks.com/articles/Solution/Clients-receiving-proper-IP-addresses-but-not-able-to-pass-traffic-through-default-gateway-on-B-EWC-topology ...

Nathiya_M · 04-26-2018

Hi Aman, Issue with all the APs in the controller? You can attach a cable to the console port and capture the log output via putty. Regards, Nathiya M

Nathiya_M · 01-25-2018

Hi Gerald, The only standalone models were the AP3630 or AP3640, all other model AP's are made to get their configurations from a wireless appliance. https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-i-use-WS-AP3610-and-WS-AP-3710i-As-a-St...

Nathiya_M · 01-25-2018

Hi Gerald, AP3916 cannot be used as standalone AP. You need a physical or virtual controller. Regards, Nathiya M

Nathiya_M · 01-08-2018

Hi El Vin, Please check the below article regarding the AP not broadcasting SSID in the backup controller. https://gtacknowledge.extremenetworks.com/articles/How_To/Configure-High-Availability-on-the-Extreme... Click APs tab > Bulk Configuration ...

Extreme Networks

User Statistics

User Activity

Understanding WPA3-Personal and Transition Mode Through Real-World Packet Captures

Re: client receive no dhcpoffer

RE: AP is rebooting Continuously

Re: Can Extreme Wireless (IdentiFi) be deployed as stand-alone or it really needs a controller?

Re: Can Extreme Wireless (IdentiFi) be deployed as stand-alone or it really needs a controller?

RE: C35 High Availability