Howdy,
I am currently testing two C35 controllers - as part of our testing we were able to get some access points provisioned fine on a subnet existing on the two controllers in a HA pair.
However, I have been trying to get the access points to provision on an external network using DHCP option 78. The attribute string I have tested with is 1 0.0.0.0 1.1.1.1 in hex without spaces however the access point does not seem to pick this up - at least not visibly.
Nothing in /tmp/log indicates the DHCP options have been picked up, there are also several entries with:
Mar 21 13:10:37 cap: 01090:ru_connect_to_ma.c:991-ru_connect_to_ac_ru_manager()- IP https://devices.extremenetworks.com, state URL_ITEM_STATE_PENDING, flag URL_ITEM_FLAG_STATIC_HWC, retries 2, timestamp 55000, standby 300000 pversion 2 Mar 21 13:10:37 cap: 01090:ru_connect_to_ma.c:1016-ru_connect_to_ac_ru_manager()- HWC IP https://devices.extremenetworks.com, state URL_ITEM_STATE_PENDING, diff_ticks 1000, TO_ticks 300000
On a likely unrelated note, we're not able to get it to statically provision either using:
cset authip 1 0.0.0.0
capply
csave
reboot It shows the following logs:
Mar 21 13:28:31 cap: 01090:ru_connect_to_ma.c:1016-ru_connect_to_ac_ru_manager()- HWC IP 0.0.0.0, state URL_ITEM_STATE_NO_ANSWER, diff_ticks 2000, TO_ticks 5000
Mar 21 13:28:32 cap: 01090:ru_mgmt.c:2741-whsl_trans()-S_EDISC 159It is able to communicate fine with the controller and curl the web interface of the controller just fine.
Any ideas here?
Thanks
