enable radio1 and radio2 at access point connect to c5210 controller but i cannot see ssid at my mobile

[Mikaeil_Beigpou]

enable radio1 and radio2 at access point connect to c5210 controller but i cannot see ssid at my mobile

[Ronald_Dvorak]

download the user guide from the extranet...

https://extranet.extremenetworks.com/downloads/Pages/WirelessControllers.aspx

Go to Documentation > Wireless Software Guide >

[Mikaeil_Beigpou]

please can help me step by step to create a topology, wlan service and VNS and assign it to the AP radios

[Gareth_Mitchell]

Hello Mikaeil

As Ron stated there are many reasons this could be happening. Did you create a topology, wlan service and VNS and assign it to the AP radios?

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-Wireless-Service-on-the-Id...

-Gareth

[Ronald_Dvorak]

That was just an example, with no experience with the product there could be 100 different things that you've missed during the configuration.

As I've mentioned my advice is to attend a training or pay someone with experience to install it for you.

[Mikaeil_Beigpou]

i turn on the Wifi adapter on the phone but donot see signal of wireless