Showing results for 
Search instead for 
Did you mean: 

enterasys ap 3605 radios

enterasys ap 3605 radios

New Contributor II
I have a 3605 Enterasys AP installed, which uses a wireless controller. The AP was working, but now the controller says its Radios are OFF. However the AP still has an address, and the controller shows it as up. Does this mean the AP isn't getting enough power, or something else?


Extreme Employee
Additional info....
Doug Hyde
Director, Technical Support / Extreme Networks

Still seeing poll time-outs as below

"Wireless AP session poll disconnect Wireless AP session timed out. (AP SN 15141897085D0000 AP NAME CLR-13 AP IP timeout 45 secs (active tunnel)

the max time out observed is 60sec, will poll time outs (ap reboots) stop if poll timer will be set to 2 Min.

Honored Contributor
GUI > AP > select AP > advanced > Poll Timeout = 15seconds

GUI > Controller > Administration > Availability > Detect link failure in = 10seconds

Can I have the default poll timer value Pls....