enterasys ap 3605 radios

[Laura4]

I have a 3605 Enterasys AP installed, which uses a wireless controller. The AP was working, but now the controller says its Radios are OFF. However the AP still has an address, and the controller shows it as up. Does this mean the AP isn't getting enough power, or something else?

[Doug]

Additional info....

http://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-Access-Points-reboot-due-to-Poll...

[Saiprasad_Rao_R]

Still seeing poll time-outs as below

"Wireless AP session poll disconnect Wireless AP session timed out. (AP SN 15141897085D0000 AP NAME CLR-13 AP IP 10.20.21.196 timeout 45 secs (active tunnel)

the max time out observed is 60sec, will poll time outs (ap reboots) stop if poll timer will be set to 2 Min.

[Ronald_Dvorak]

GUI > AP > select AP > advanced > Poll Timeout = 15seconds

GUI > Controller > Administration > Availability > Detect link failure in = 10seconds

[Saiprasad_Rao_R]

Can I have the default poll timer value Pls....