Alcatel Phone 8158s (latest Firmware) cannot connect to IdentiFi SSID (WPA2-PSK).
From EWC perspective session is established with all needed tings - Client (48:7a:55:1d:26:1c) also getting IP 10.10.100.99.
From Client perspective no wlan session is done - no network connect.
Client cannot be reached and is not working.
We do upgrade of AP (3915i) and EWC to latest 10.51.17 already - no change.
AP.log show this messages:
May 6 10:58:55 hostapd1: 1620298735.858759: ath12: STA 48:7a:55:1d:26:1c IEEE 802.11: associated
May 6 10:58:55 hostapd1: 1620298735.858893: ath12: STA 48:7a:55:1d:26:1c WPA: wpa_validate_wpa_ie776 key_mgmt 02 num_pmkid=0 pmksa=(nil)
May 6 10:58:55 krn: ieee80211_wireless.c:9160/ieee80211_ioctl_setkey()-ath12 48:7A:55:1D:26:1C keyix=65535
May 6 10:58:55 krn: ieee80211_wireless.c:9301/ieee80211_ioctl_setkey()-ath12 48:7A:55:1D:26:1C error=0 keytype=3 keylen=16 keyix=65535
May 6 10:58:55 hostapd1: 1620298735.867982: ath12: STA 48:7a:55:1d:26:1c WPA: pairwise key handshake completed (RSN)
May 6 10:58:55 krn: [19/1] FWLOG: [230002] RATE: ChainMask 1, peer_mac 26:1c, phymode 5, ni_flags 0x00041806, vht_mcs_set 0x0000, ht_mcs_set 0x00ff, legacy_rate_set 0x0ff0
May 6 10:58:55 krn: [31/5] FWLOG: [230002] RTT_REPORT ( 0x2804, 0x3, 0x479, 0x0, 0x9 )
May 6 10:58:55 krn: [22/27] FWLOG: [230012] WAL_DBGID_SECURITY_UCAST_KEY_SET ( 0x261c, 0x0 )
May 6 10:58:55 krn: [22/29] FWLOG: [230012] WAL_DBGID_SECURITY_ENCR_EN ( )
May 6 10:58:55 krn: [22/26] FWLOG: [230012] WAL_DBGID_SECURITY_ALLOW_DATA ( 0x43cfb0 )
May 6 10:58:56 sensor: 02415:m3TaskApp.c:198/m3MsgDoSend()-m3MsgDoSend open fd to m2task driver, fd = rc = 27
May 6 10:58:56 krn: chantry_arppxy.c:211/chantry_wlan_proxy_arp()-ARP Probe: learn src mac 48:7a:55:1d:26:1c -> ip 10.10.100.99
May 6 10:58:58 krn: chantry_arppxy.c:211/chantry_wlan_proxy_arp()-ARP Probe: learn src mac 48:7a:55:1d:26:1c -> ip 10.10.100.99
May 6 10:58:59 krn: chantry_arppxy.c:211/chantry_wlan_proxy_arp()-ARP Probe: learn src mac 48:7a:55:1d:26:1c -> ip 10.10.100.99
May 6 10:59:01 krn: chantry_arppxy.c:162/chantry_wlan_proxy_arp()-Received ARP defense from a client on chantry12: mac 48:7a:55:1d:26:1c -> ip 10.10.100.99
May 6 10:59:01 timesync: TIMESERVER=10.10.0.100 AP_MODE=0 DISCOV_MODE="On-Prem"
Does anybody ever seen this type of errors before ?
Client can connect to other vendor AP.
Mgmt-Frame protection and other common problem sources are disabled already.
