cancel
Showing results for 
Search instead for 
Did you mean: 

Purview Integration Wireless Controller 9.21

Purview Integration Wireless Controller 9.21

Michael_Kirchne
Contributor
Hi community,

has anyone integrated the wireless solution V 9.21 into Purview? I get the TopN Mirror up and running but I don't get netflow packets.

Netflow is configured in the section "VNS->Global->NetflowMirrorN"
There I configured the Mgmt IP of my Purview instance and choose esa1 as my L2 Mirror Port.

Any idea?

Best Regards
Michael
47 REPLIES 47

Hi..i havê the same situation. On my lab purview is populate because the port is not tagged. On customer the port is tagged and purview dont populate . any idea

Andre_Brits_Kan
Contributor II
Hi Guys
Perhaps this post can assist:

We have deployed a V2110 with NMS 6.3
We have enabled the purview integration.

In Oneview we see no Application flows.
If I look at the TCPDUMP on the Purview appliance on eth0 I see the Netflow Traffic As follows:

17:56:15.377880 IP (tos 0x0, ttl 126, id 0, offset 0, flags [none], proto UDP (17), length 112)
10.0.10.250.2095 > rbhs-pur-01.rondebosch.local.2095: UDP, length 84
17:56:45.454054 IP (tos 0x0, ttl 126, id 0, offset 0, flags [none], proto UDP (17), length 112)
10.0.10.250.2095 > rbhs-pur-01.rondebosch.local.2095: UDP, length 84
17:57:15.588240 IP (tos 0x0, ttl 126, id 0, offset 0, flags [none], proto UDP (17), length 112)
10.0.10.250.2095 > rbhs-pur-01.rondebosch.local.2095: UDP, length 84
17:57:45.666345 IP (tos 0x0, ttl 126, id 0, offset 0, flags [none], proto UDP (17), length 112)
10.0.10.250.2095 > rbhs-pur-01.rondebosch.local.2095: UDP, length 84

If I look at the TCPDump on the mirror port I also see all the mirrored traffic.
But I see not info in "Oneview"

So in summary I see the Netflow data and the Mirror data on the purview appliance, but nothing in Oneview.....

Any ideas??

Regards

Mike_Thomas
Extreme Employee
The early access of Netsight 6.3 is available now if you have requested early access rights.


Michael_Kirchne
Contributor
Hi Ron,

correct - every NMS-ADV-XX comes with 3000 flows/min & 100 Clients. Just like the 500 NAC End-System licenses.

Regards
Michael

Ronald_Dvorak
Honored Contributor
Ok another question - this time about the license.
I've Netsight with a NMS-ADV-U with no additional licenses installed.
In Oneview I'd see that my Purview supports 100 clients with 3000 flows.

Is that basic license included in every advanced license to try out Purview or only in the unlimited Netsight license.

-Ron

84f9ab4c22e846c6be339a6941ab7f4c_RackMultipart20150721-1775-1g7wia9-purview_license_inline.png


GTM-P2G8KFN