Purview Integration Wireless Controller 9.21

[Michael_Kirchne]

Hi community,

has anyone integrated the wireless solution V 9.21 into Purview? I get the TopN Mirror up and running but I don't get netflow packets.

Netflow is configured in the section "VNS->Global->NetflowMirrorN"
There I configured the Mgmt IP of my Purview instance and choose esa1 as my L2 Mirror Port.

Any idea?

Best Regards
Michael

[Mike_Thomas]

The early access of Netsight 6.3 is available now if you have requested early access rights.

[Michael_Kirchne]

Hi Ron,

correct - every NMS-ADV-XX comes with 3000 flows/min & 100 Clients. Just like the 500 NAC End-System licenses.

Regards
Michael

[Ronald_Dvorak]

Ok another question - this time about the license.
I've Netsight with a NMS-ADV-U with no additional licenses installed.
In Oneview I'd see that my Purview supports 100 clients with 3000 flows.

Is that basic license included in every advanced license to try out Purview or only in the unlimited Netsight license.

-Ron

[Ronald_Dvorak]

Thanks Paulo,

I've took a closer look into the KT and have two more questions...

1) controller mirror port
Is the traffic send untagged or is the tag from the respective role used to forward the traffic to Purview?

2) mirror N packets
If I unterstand it correctly only the first 15 packets/flow are mirrored to Purview per default.
So I should be able to enable it also for remote/branch offices without having all data copied back to the controller, right ?

-Ron

[Luis_Mendes]

Collector process don´t show FLOWS Records...but sensor read packets